Before You Begin - Duronic TPS Manual De Instrucciones

• Remove all packaging and set aside.
• Clear a large enough area to assemble the screen. Make sure the area is
larger than the sides of the screen.
• Do not assemble the screen in areas of high temperature or wind to avoid
incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to
assemble the screen.
• This screen can be transported using the handle on the pole, either as one
full unit or in two parts.
This projector screen comes fully assembled and can be used straight from
the box.
Lift out the projector screen from the box and place aside.
In order to protect the screen from getting marked or stained, ensure that the
screen is kept away from dust and dirt.
Decide on a location for your screen. The TPS screen is a projector stand
which is held freestanding by a tripod stand.
a. Open up the tripod stand and place in the location you wish to erect it
in.
b. Rotate the screen 90° so that it lies horizontal on the pole.
c. Lift the screen a little and hook it onto the top of the pole.

Before You Begin

Assembly Instructions
90°
6