Duronic TPS Manual De Instrucciones página 7

Extending the Screen
1. Lift the first lever on the side of the pole to release
the pole lock, and extend the pole upwards until the
screen is fully extended.
2. Push the lever back down to lock the pole and
screen in place.
Retracting the Screen
1. Lift the same (first) lever on the side of the pole
to release the pole lock, and lower the pole
downwards.
2. Push the lever back down to lock the pole in place.
Lowering the Screen
1. Lift the second lever and use the handle to slide the
screen downwards.
2. Push the second lever back down to lock the pole
in place.
Lifting the Screen
1. Lift the second lever and use the handle to slide the
screen upwards.
2. Push the second lever back down to lock the pole
in place.
Cautions:
1. Make sure that the screen is extended from the casing gently.
2. Make sure that the screen is retracted back into the casing after each use.
Failure to do so may result in damage to the locking catch and can also
allow the screen to gather dust.
Operating Instructions
7
2
1
180°
180°
3