Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
Remove all packaging and set aside.
Clear a large enough area to assemble the screen. Make sure the area is
larger than the sides of the screen.
Assembly of the screen may require two people for some of the steps.
Do not assemble the screen in areas of high temperature to avoid
incurring any damage to the screen.
Ensure that you read through this manual entirely before beginning to
assemble the screen.
This projector screen comes fully
assembled and can be used straight
from the box.
Lift out the projector screen from the box
and place aside.
In order to protect the screen from
getting marked or stained, ensure that
the screen is kept away from dust and dirt.
Decide on a location for your screen. The DPS is a freestanding projector
screen which is designed to be placed on a table top.
1.
Place the projector screen on the table surface.
2.
Rotate the feet 90° away from the casing.

Before You Begin

Assembly Instructions
6
90°

Publicidad

loading