After Juicing; Maintenance & Cleaning - Duronic JE7C Manual De Instrucciones

• After use, do not empty the machine until the power has been
disconnected.
• CAUTION: the cutters are very sharp. To wash them hold the cutter
under running water - do not wash it with your hands.
• This machine must not be used for anything other than making juice.
• You must not put anything in this juicer except fruit and vegetables.
• If you notice the wire or plug is damaged in any way, stop using the
juicer immediately and contact the manufacturer to seek advice on
repairing or replacing the machine.
• If this machine is going to be used often, it is important to keep it clean
and dry when not in use.
• If you plan on not using the machine for a long time, please store it in
a dry and well-ventilated place to prevent the motor going mouldy.
• All parts of the machine such as pushing bar, cover, middle ring,
residue cup and juice nozzle cover are all washable. To clean the main
body of the machine wipe with a damp cloth and dry afterwards.
Before using the machine check the power switch on the machine is
off [O]. It is dangerous to switch the machine on without it being fully
assembled. Please see the diagram for a visual guide on how to assemble
your juicer.
1. Check the machine is switched off [O]
2. Place the middle ring (4) onto the main machine (6) and click into place,
ensuring that the rotor lines up to the underside of the middle ring.
3. Put the juicing net (3) inside the middle ring (4) ensuring it slides into
the space completely.
4. Place the transparent cover (2) on top and click into place.
5. Move the handle (5) upwards over the transparent cover and click into
place.

AFTER JUICING

MAINTENANCE & CLEANING
HOW TO USE YOUR JUICER
ASSEMBLY
8