Duronic ICM120 Manual De Instrucciones página 8

• Before first use, remove all the packing materials, check the machine
carefully and make sure that the machine, power cable and plug are
normal and do not have any damage.
• The machine should be positioned on a level surface. To ensure
sufficient ventilation, the distance of the back of ice maker to the wall and
surrounding objects should be at least 15cm. It should not be positioned
near an oven, radiator or any other heat source.
• Before using the machine for the first time, put the machine in place and leave
the transparent cover open for at least two hours.
• Distilled water should not be used. Mineral water is recommended.
There are light 3 indicators and 1 button on the control panel:
ICE FULL
ADD WATER
ICE MAKING
ICE MAKING:
• When you plug in the ice maker machine the ICE MAKING light indicator
will flash.
• Press the power button to switch on the machine. The ICE MAKING
indicator light will stay on and the machine will start to make ice cubes.
• After the first batch of ice cubes have finished being made, the de-icing
will activate, followed by the ice shovel which will move the ice into the ice
basket.
Before First Use
The Control Panel
Ice full alarm
Water shortage alarm
Ice is being produced
Power button
Before First Use
8