Chicco 00007388100000 Instrucciones De Uso página 22

than 150 ml must be placed on the baby food jar/feeding bottle support (b) before being lowered
into the central body (a). This helps provide a better grip and avoids burns.
Make sure that the heating water does not spill from the top of the device and that it does not
reach the mouth of small feeding bottles or jars.
If water spills out of the central body (a) after the feeding bottle has been inserted, immediately dry
the external area and base of the bottle warmer and the power cable and plug with a dry cloth and
remove the excess water from the tank.
4. Insert the plug in the power socket: an audible signal will be heard.
5. Switch on the interface by touching the on/off touch button (e): an audible signal will be heard
and the indicator lights (g) will begin to blink and turn on in progression.
6. Select the heating mode by touching the selector button (f ) repeatedly, as follows:
a. 1 time: for rapid heating - This programme is specifically meant for formula. Indicator light g1
will begin to blink.
b. 2 times: for slow heating - This programme is specifically meant for breast milk. Indicator light
g2 will begin to blink.
c. 3 times: for baby food heating - This programme is specifically meant for the baby food jar. Indi-
cator light g3 will begin to blink.
7. Initiate the selected heating cycle by touching the on/off touch button (e): an audible signal
will be heard and the indicator light for the given heating mode will remain on continuously to
indicate that the heating cycle is active. After a cycle is selected (point 6), if three minutes pass
without the cycle being activated, the device will switch off automatically.
WARNING
Freezing formula is not advisable.
WARNING
Do not freeze milk in feeding bottles that have a removable base (like the Chicco Perfect5).
CAUTION
For milk collection bags, use slow heating mode.
WARNING
When heating baby food, stir the contents of the jar often to ensure an even temperature.
8. After a few minutes*** of operation the blinking indicator light for the selected function (g) and
the emission of a long audible signal mark the end of the heating cycle.
*** Warning: heating time and the final temperature of the food can vary significantly with the
size and type of container used (plastic feeding bottle, glass feeding bottle, jar, milk collection bag),
quantity of food to be heated, starting temperature (room temperature, refrigerator temperature...),
heating mode selected and consistency of the preparation.
9. To switch off the bottle warmer at any time, touch the on/off touch button (e) a second time
until the indicator lights (g) switch off and disconnect the bottle warmer power cable plug (c)
from the socket.
10. Once the bottle or baby food jar has been removed from the bottle warmer tank, dry it thor-
oughly before feeding the baby.
WARNING
Before feeding the heated food to the child, always make sure that the temperature of the food
is not too high.
If the food is not hot enough, keep the feeding bottle or jar in the bottle warmer using "maintain
temperature" mode (see the paragraph titled "Maintain Temperature"). Check the heating status at
regular intervals, making sure not to get burned, until the desired temperature is reached.
22