Descargar Imprimir esta página

First Time Pairing - Urbanista STOCKHOLM PLUS Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
S T O C K H O L M P L U S M A N U A L

1. FIRST TIME PAIRING

1.1 - Place earbuds into charging case and remove them again,
the indicator of the right (R) earphone will flash slowly.
1.2 - Open the Bluetooth settings on your device and select
"Urbanista Stockholm Plus" you will receive a "connected"
voice message when pairing is successful.
2 . RES ET EARPHON ES
2.1 - Delete "Urbanista Stockholm Plus" from the Bluetooth
settings on your device.
2.2 - Press and hold the Urbanista logo button inside the
charging case (1) for 10 seconds with the earbuds still inside the
case, until the 4 battery indicator lights flash simultaneously
(make sure that the charging case has enough power). Close the
charging case - the reset has now been successfully completed.
2.3 - Follow the instructions in section 1, "First Time Pairing",
to reconnect the earphones to your device.
3. CONTROLS
Via the logo button
TURN ON - Open the charging case OR Touch and hold the
left (L) and right (R) logo for 2 seconds. The indicator light will
flash blue three times.
TURN OFF - Place earphones in the charging case and close
the lid OR Touch and hold either the right (R) or left (L) logo
for 10 seconds. The indicator light will flash blue three times.
TURN ON VOICE ASSISTANT - Touch the right (R) logo twice.
TURN OFF VOICE ASSISTANT - Touch the right (R) logo twice.
4
( E N G )
ANSWER A CALL - Touch the logo twice on the right (R) or left
(L) earphone.
END A CALL - Touch the logo twice on the right (R) or left (L)
earphone.
REJECT A CALL - Touch and hold the logo on the right (R) or
left (L) earphone for 2 seconds.
PLAY MUSIC - Touch the logo twice on the left (L) earphone.
PAUSE MUSIC - Touch the logo twice on the left (L) earphone.
ADJUST THE VOLUME (+) - Touch the logo once on the right
(R) earphone.
ADJUST THE VOLUME (-) - Touch the logo once on the left (L)
earphone.
SKIP A TRACK FORWARD - Touch and hold the logo on the
right (R) earphone for 2 seconds.
SKIP A TRACK BACKWARD - Touch and hold the logo on the
left (L) earphone for 2 seconds.
Both earbuds have a built-in microphone and can be used as a
single earpiece if needed
4. CHARG IN G
The earbuds charge automatically when placed in the charging
case. Once fully charged, the blue indicator light on the ear-
phones (2) will switch off. You can charge your earbuds five
times before you need to recharge your case. When opening
the lid to the case, the four battery indicator lights (3) display
how much power capacity the battery has:
5

Publicidad

loading