Before Using For The First Time; Preliminary Cleaning; Place Of Installation - essentiel b ERFI 125-55b1 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

before using for the first time

Unpacking
- Remove the shipping box.
- Check that the appliance has not been damaged during transport. Do not plug in a damaged appliance
under any circumstances! If the appliance is damaged, please contact your retailer.
- Remove all tape and packaging material on the inside and outside of the appliance.

Preliminary cleaning

- Clean the inside of the appliance with lukewarm water with a little white wine vinegar added to it. Do not
use soap or detergent as the odour may linger. After cleaning, completely dry the appliance.
- You can use white spirit to remove any remaining adhesive from the outside of the appliance.
- To clean the appliance, always turn it off and unplug it, or remove the fuses or flip the circuit breaker
to the off position.
set-up

Place of installation

WARNING: To avoid any risk due to the instability
of the appliance, it must be secured as per the
instructions.
Place your refrigerator on a stable, level surface.
The appliance must be installed in a dry, well-ventilated room.
The appliance's energy consumption and efficient operation are affected by the room temperature.
Your appliance will be heavy when loaded with food: it must, therefore, be placed on a strong, solid
floor.
Avoid placing the refrigerator in a location with high humidity to minimise the possibility of any metal
parts rusting. Avoid splashing water on the unit to avoid the risk of a short circuit.
Avoid placing your refrigerator close to any combustible substances such as gas, petrol, alcohol,
hairspray, etc. These products cannot be stored in the refrigerator.
The installation of the appliance must not obstruct the socket.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido