Before First Use; Installation Location - essentiel b ERCVE200-60b1 Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

unpacking
Remove the shipping box.
Check that the appliance has not been damaged during transport. Do not plug in a
damaged appliance under any circumstances! If the appliance is damaged, please contact
your retailer.
Remove all adhesive tape and packaging materials on the inside and outside of the
appliance.

Before first use

Clean the inside of the appliance with a little white wine vinegar diluted in warm water.
Do not use soap or detergent as the odour may linger. After cleaning, dry the appliance
completely. Wipe electrical parts with a soft cloth only.
You can use white spirit to remove any remaining adhesive from the outside of the appliance.
To clean the appliance, always unplug it, or remove the fuses or turn off the circuit
breaker.
installation

Installation location

This refrigeration appliance is not intended to be used as a built-in appliance. Place your
refrigerator on a stable, level surface. Your appliance will be heavy when loaded with food:
it must therefore be placed on a solid, resistant floor. The appliance must be installed in
a dry, well-ventilated room at room temperature. Refer to the table in the next section
'Climate class'.
Never place an appliance that emits heat (microwaves, toasters, etc.) on top of the
refrigerator.)
The appliance must not be exposed to direct sunlight.
The appliance must not be exposed to rain.
The appliance must not be installed next to a radiator, a stove or any other heat source.
The appliance's energy consumption and efficient operation are affected by the room
temperature.
The appliance must be installed so that the power outlet is accessible. The appliance can
be installed on its own, next to a piece of furniture or in front of a wall. Make sure that there
is enough free space around the appliance so that the door and drawers can be opened
conveniently.
Make sure that it is not resting on its power cable after installation.
27
V.1.0
installation

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ercve200-60v1

Tabla de contenido