3. WARNING
Do not stand or step on the PV module (Frame, Glass, Film and Terminal box).
4-1. ELECTRICAL OUTPUT (for NA-F115GK, NA-F121GK, NA-F128GK)
Rated electrical characteristics of Isc and Voc are within ±10 percent of the indicated values and +10/-5 percent of Pmax under STC (standard test
conditions) (irradiance of 1000 W/m
Table-1-1. Electrical characteristics (at STC)
Model
Type
name
(Nominal)
Tandem
NA-F115GK
(*1)
(nominal)
Tandem
NA-F121GK
(*1)
(nominal)
Tandem
NA-F128GK
(*1)
(nominal)
(*1)Tandem: amorphous silicon / microcrystalline silicon tandem structure cell
(*2)The maximum series number of modules depends on the local conditions. This value is calculated under the condition of Voc at -40degC.
4-2. ELECTRICAL OUTPUT (for NA-F135GK)
Rated electrical characteristics of Isc and Voc are within ±10 percent of the indicated values and +5/-5 percent of Pmax under STC (standard test
conditions) (irradiance of 1000 W/m
Table-1-2. Electrical characteristics (at STC)
Model
Type
name
(Nominal)
Tandem
NA-F135GK
(*1)
(nominal)
(*1)Tandem: amorphous silicon / microcrystalline silicon tandem structure cell
(*2)The maximum series number of modules depends on the local conditions. This value is calculated under the condition of Voc at -40degC.
System design should consider both initial values and nominal values.
Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current and/or voltage than reported at
Standard Test Conditions. Accordingly, the values of Isc and Voc marked on this module should be multiplied by a factor of 1.25 when determining
component voltage ratings, conductor capacities, fuse sizes and size of controls connected to the module output.
2
, AM 1.5 spectrum, and a cell temperature of 25 °C (77°F). "Terms of guaranty" are specified separately.
Initial /
Maximum
Open-
Stable
Power
Circuit
(Pmax)
Voltage
(Voc)
Initial
135.4
59.6
Stable
115
58.6
Initial
142.4
60.2
Stable
121
59.2
Initial
150.6
60.8
Stable
128
59.8
2
, AM 1.5 spectrum, and a cell temperature of 25 °C (77°F). "Terms of guaranty" are specified separately.
Initial /
Maximum
Open-
Stable
Power
Circuit
(Pmax)
Voltage
(Voc)
Initial
158.9
62.5
Stable
135
61.3
Short-
Voltage
Current
Circuit
at
at
Current
Point of
Point of
(Isc)
Max.
Max.
Power
Power
(Vmpp)
(Impp)
3.34
47.7
2.85
3.26
44.5
2.59
3.43
48.2
2.96
3.34
45.0
2.69
3.54
48.6
3.10
3.45
45.4
2.82
Short-
Voltage
Current
Circuit
at
at
Current
Point of
Point of
(Isc)
Max.
Max.
Power
Power
(Vmpp)
(Impp)
3.49
49.7
3.20
3.41
47.0
2.88
Maximum
Over-
Application
system
current
class
voltage
protection
1000V
5A
A
1000V
5A
A
1000V
5A
A
Maximum
Over-
Application
system
current
class
voltage
protection
1000V
5A
A
Maximum
series
configuration
(*2)
13
13
13
Maximum
series
configuration
(*2)
13