General Description; Overview; Function Description; Scope Of Delivery - Grizzly Tools EHS 600-61 R Traducción Del Manual De Instrucciones Original

GB
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt,
in order to avoid overstressing of
the machine. Damages caused by
cutting with blunt blades are not
covered by the guarantee.

General Description

The illustration how to handle the
appliance can be found on page 2.

Overview

1 Safety blade
2 Hand protection
3 Loop grip with deadman switch
4 Vents
5 Grip adjustment release
6 Five-position adjustable grip
7 Mains cable
8 Tension relief
9 On/off switch
10 Blade protection

Function Description

The electric hedge trimmer is driven by
an electronic motor. The equipment is
double-insulated for safety and does not
require earthing.
The hedge trimmer is equipped with a
double-sided safety cutter bar. When
cutting, the blades move backwards and
forwards in linear motion.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and bri-
ars.
Please note the following descriptions for
the function of the operating components.
60

Scope of delivery

- Electric hedge trimmer
- Blade protection
- Instruction Manual
Operating the Hedge
Trimmer
Wear suitable clothing and work
gloves when working with the
equipment.
Ensure that the equipment is
functional before each use. The
On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop work-
ing with the equipment. Ensure
that the mains voltage value
matches the label on the equip-
ment.
Note noise protection and local
specifications. The use of the
equipment on certain days (e.g.
Sundays and national holidays), at
certain times of day (lunch times,
night time quiet periods) or in spe-
cial areas (e.g. health resorts, clin-
ics etc.) is restricted or forbidden.
The blades continue to move for
a while after the equipment is
switched off. Allow the blades to
come to a complete standstill.
Do not touch the moving blades
and do not brake them. Risk of
injury!

Switching On and Off

Ensure that you are standing in a
firm position with both hands grip-
ping the hedge trimmer away from