Preparing Juice - Unold 78130 Manual Del Usuario

5. Check if the appliance is placed firmly.
6. Connect the base to the mains supply by means of the lead cable (220–
240 V~, 50/60 Hz).

PREPARING JUICE

Note: Maximum short operating time is 5 minutes. Thereafter allow the appliance to
first cool down for several minutes, before making more juice.
1. Prepare the desired citrus fruit by washing and halving it.
2. Unwind the power cord completely.
3. Place the collection container with spout into the appliance. The spout on
the collection container must sit in the corresponding recess on the motor
block.
4. Next, place the sieve into the collection container.
5. Put on the smaller cone. The smaller cone is ideal for smaller fruit, such
as lemons.
6. If you want to squeeze larger fruit, fit the larger cone on the smaller cone.
Ensure that both cones are seated firmly.
7. Open the outflow valve by lightly pressing the spout downward.
8. Place a container of sufficient size under the spout, e.g. a glass.
9. Place the halved citrus fruit onto the cone with the sliced area downward
and lightly press down to seat the citrus fruit in place.
10. Now, press the pressing lever down. This switches on the motor automati-
cally, pressing out the fruit.
11. Release the pressing lever again to stop the motor of the appliance.
12. Do not press too forcefully as this will make the cone turn more slowly and
place excessive stress on the motor. You will achieve the best results by
proceeding slowly.
13. If you are preparing larger quantities of juice, you must unplug the plug from
the power socket from time to time, then allow the juice to flow out into a
vessel and clean the sieve.
14. Note: The maximum short operating time is 5 minutes. Afterwards, allow the
appliance to first cool down for several minutes before making more juice.
15. After extracting the juice, push the outflow valve upwards again to close it
and thus prevent dripping.
Stand 6.10.2021
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
19 von 56