Technoline WT 494 Manual De Instrucciones página 11

Press SET once again, "24Hr" will flash, press
3.
For 12Hr time format, "PM" will appear on the left of time digits to indicate the afternoon time.
There is no AM icon to indicate before-noon time.
Press SET once again, "n05" flash, press
4.
60 min.).
Press SET once again, "°C" flashes, press
5.
or °F.
6. Press SET again to confirm. The set time is displayed.
Note: the clock exits the set mode when no key is pressed in approximate 10 seconds.
TO SET ALARM 1 AND ALARM 2 (default alarm time at 6:00 AM)
1. Press and hold
desired hour. Press and hold
2. Press
minutes. Press and hold
3. Press hold
wake-up sound sources :-
bu = Buzzer
rd = Radio
If "rd" (wake-to-radio) is selected, LED display "HI". Press
4.
volume of radio to "LO". This selection does not apply for "bu" (wake-to-buzzer).
5. Press
above to set Alarm 2.
6. In the middle of setting the alarm, press SET once to store your alarm setting and exit the
alarm set mode.
Note: the clock exits the alarm set mode when no key is pressed in approximate 10 seconds.
TO TURN ON OR OFF ALARM 1 AND 2
1. Press once to activate Alarm 1,
2. Press once again to activate Alarm 2,
3. Press once again to activate both Alarm 1 and 2. Both
4. Press once again to deactivate both alarms (both
LED and hour digit "6" flash, press
,
or
once again, the minute digits "00" flash. Press
or
once again, LED displays "bu" (buzzer)., Press
LED and Alarm 2's hour digit "6" flash. Repeat Step 1 to 3
once again,
to select "12 Hr" or "24 Hr" time format.
/
or to set the snooze duration (from 5 min to
or to select temperature readout in °C
to accelerate setting at high speed.
to accelerate setting at high speed.
LED appears.
LED appears.
LED and
EN3
or
or to set desired
or
or to select the wake up
LED and LED appear.
LED disappear).
to set the
to select the