Technical Features; Information For Users - IRSAP 1291M0921 Manual De Instrucciones

The Towel Warmer radiator is an electrical appliance endowed with the following features:
• Voltage-feed 230V 50Hz, 1ph
• Insulation Class II
• Protection degree IP24
• Length electrical cable 1200 mm
• Wi-Fi electronic control. (Schuko) or Wi-Fi in compliance with EDF/GIFAM/DOMERGIE. (Fil-pilote)
The association between electrical heater and the radiator model allows a radiator surface temperature no
higher than about 70°C
The Towel Warmer radiator is filled in the factory with a measured quantity of a special liquid, to optimize
the heat transmission (excluding Polygon range).
Because of this, any repairs which require the opening of the towel-rail, must be executed from the
manufacturer. This applies equally in the unlikely event of the special liquid leaking out of the towel-rail.
The thermostat can work exclusively when paired with a specially prepared electric heating element,
equipped with safety devices to limit excess temperature and make the system safe in the event of
abnormal factors (see Warnings).
The radiator must be installed by qualified staff.
Always fix the heated Towel Warmer to the wall as per the assembly instructions enclosed.
The installation must be carried out by a specialized firm in compliance with the standards in force.
When installing the towel rail the IEC 60364-7-701 according to the edition in force must be complied.
To supply the tower rail radiator, an omnipolar switch, with at least 3 mm of distance between contacts,
must be employed.
When installing in bathrooms or in shower-rooms, the appliance should be installed in such a way to avoid
the switch and other controls to be reached by people using the bathroom or the shower. (see Fig. A)
The radiator must not be installed immediately beneath a fixed current outlet.
Take utmost care while installing the Towel Warmer radiator to avoid damaging the electronic thermostat
and the connecting cable.
In order to avoid every risk to the smallest children, we recommend installing the device in such way that
the lowest heating pipe is at least 600 mm above the ground.
See quick start guide
Tutorials and what's new available in the app
in accordance with article 14 of the Directive 2012/19/EU of 07/07/2012 on waste electrical and electronic equipment.
•
The symbol shown above, present also on the equipment, indicates that it has been placed on the market and that, when
the user decides to get rid of it, it must be disposed of in separate waste collection (including all the components, sub-
assemblies and consumer materials which are an integral part of the product).
•
For information on the systems for collecting these appliances, please contact the company or another subject enrolled in
the various National Registers for other countries in the European Union. Waste produced in the home (or of similar origin)
may be consigned to systems for the separate collection of urban waste.
•
When buying a new appliance of an equivalent type, it is possible to hand over the old equipment to the seller. The seller
will then contact the subject in charge of the collection of the equipment.
•
The appropriate separate collection of the scrapped equipment and the subsequent operations of processing, recovery and
environment-compatible disposal, allows the avoidance of potential negative effects on the environment and on human
health, while favouring the recycling and recovery of the component materials.
The unauthorised disposal of the product by the user entails the application of the sanctions contemplated under the national
approval of Directives 2011/65/EU, 2008/98/EC and 2015/1127/EU.

TECHNICAL FEATURES

HEATING ELEMENT TECHNICAL CHARACTERISTICS
METHOD OF USE AND OPERATION

INFORMATION FOR USERS

INSTALLATION