HAMPTON BAY EF200SQ-52 Guía De Uso Y Mantenimiento página 13

Assembly - Attaching the Light Kit
2
Installing the bulbs and attaching the
glass bowl
WARNING: Allow the glass bowl to cool completely before
removing.
CAUTION: Make sure the power is off before attaching or
removing the glass bowl.
CAUTION: Over lamping the fan will result in the fan lights
shutting down until the proper wattage bulbs are installed.
Reset the lights by turning off the power, replacing the bulbs
with the correct wattage bulbs, and turn the power on.
□
Remove the compressing ring (MM) from the threaded
socket of the light kit (G) by turning the compressing ring
(MM) counterclockwise until it unlocks.
□
Insert the glass shade (H) into the light kit cowling and turn
the compressing ring (MM) clockwise to tighten and secure
the glass shade. Repeat for the remaining shades.
□
With power off, screw the LED bulbs (K) into the sockets.
□
Attach the pull chain extensions (BB) to the light pull chain
and fan pull chain.
13
Please contact 1-855-HD-HAMPTON for further assistance.
F
G
H
MM
K
BB
HAMPTONBAY.COM