Remote Control - Datacom TDT-HD150 Manual De Usuario

Remote Control

1. MUTE: Mute or Restore Audio Output.
2. INFO: Displays additional channel information.
3. TTX: Displays Teletext Information.
4. DTV/VCR: Switches the product to VCR input if
it is in DTV state. Switches the product to DTV if
it is in VCR state.
5. SUBTITLE: Selects Subtitles Language.
6. EXIT: Exits the current Menu or returns to the
previous Menu.
7. OK: Confirms an entry or selection. Displays
the list of channels.
8. RIGHT / LEFT : Navigates through the Menus.
Increases or decreases volume.
9. TV/RADIO: Switches from TV function to Radio
function and from Radio to TV.
10. RECALL: Used to switch between the last two
viewed channels .
11. GOTO: Selects the play time of media.
12. PREV: Skips to the previous track during
playing media.
13. NEXT: Skips to the next track during playing
media .
14. REPEAT: Selects Repeat or turn off Repeat
mode.
15. STOP: Stops media play.
16. STANDBY: Switch the product to on or standby.
17. EPG: (Electronic Program Guide)T urns the program guide on.
18. AUDIO: Selects an Audio Language or Audio Mode.
19. UP / DOWN: Navigates through the Menus. Selects the next or previous
Channel.
20. MENU: Turns on Main Menu.
21. FAVOURITE: Turns on Favourite Menu.
22. 0-9 (Numeric Buttons): Selects a channel or setting.
23. FWD: Searches forwards during media play.
24. REV: Searches backwards during media play.
25. PLAY: Starts or resumes media play.
26. PAUSE: Pauses media play.
27. COLOUR BUTTONS: Operate different function in TEXT screen.
Red button: In picture viewing mode, press to zoom in picture.
Green button: In DTV mode, press to toggle throufh different resolutions.
Yellow button: In DTV mode, press to change Aspect ratio.
Blue button: In DTV mode, press to access timers menu.
28. REC: Used to record the program.
29. LIST: Used to show the record program list on the current disk.
All manuals and user guides at all-guides.com
28
PVR
REC LIST
Installing the Batteries
Remove the battery cover from the Remote Control and put 2xAAA size
batteries inside the compartment.
The diagram inside the Battery Compartment shows the correct way to
install the batteries.
1.Open the cover 2.Install batteries
Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top
Box. The Remote Control has a range of up to 7 metres from the Set Top
Box at an angle of up to 60 degrees.
The Remote Control will not operate if its path is blocked.
Sunlight or very bright light will decrease the sensitivity of the
Remote Control.
3.Close the cover