Datacom TDT-HD150 Manual De Usuario página 28

2. Press the RIGHT/LEFT key to select the channel frequency
3. Press OK to start searching channels If a channel is found, it is saved and
added to the channels list. If channels can't be found, then exit the menu.
(c). Country
Select your country of residence.
(d). Antenna power
Enable Antenna Power if an external active antenna is connected.
(4) Time Setting
To access the M enu, press MENU then
options to adjust the time settings.
Press UP/DOWN to s elect an option and press RIGHT/LEFT to adjust the
setting . Press EXIT to exit the menu. s
(a). Time offset
Select auto or manual for GMT offset adjustments.
(b). Country Region
Select the Country Region when [Time Offset] is set to Auto.
(c). Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
(d). Auto Standby
If this setting is off, this function does not work. If this setting is not off, a
message will pop up after your preferred time to inform you, that the device
will go in to sleep mode. This message will appear under no any operation.
Press STANDBY button to exit sleep / auto-off mode.
(5) Option
To access the Menu, press MENU and select [Option]. The menu provides
options to adjust the OSD Language, Subtitle Language and Audio
Language.
Select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to
exit the Menu.
All manuals and user guides at all-guides.com
select [Time]. The M enu provides
(a). OSD Language
Select an OSD language .
(b). Subtitle Language
Select the preferred subtitle language.
(c). Audio Language
Select the preferred audio language for watching TV channels.
If the language is not available, the default program language will be used.
(d). Digital Audio
Select digital audio output mode.
(6) System Setting
To access the M enu, press MENU and
provides options to adjust the system settings.
Press the UP/DOWN key to s elect an option and press RIGHT/LEFT to
adjust the setting.
Press EXIT to exit the M enu .
(a). Parental Guidance
You can restrict access to channels that are unsuitable
for children. To restrict/lock the channel you will need to enter either the
default password '000000' or your own password.
(b). Set Password
Set or change the password for locked programs. Enter your old
password or the default password '000000'. You will then be asked to
enter your new password. To confirm re-enter your new password. Once it
is confirmed, press EXIT to exit the Menu.
select [System].The menu