Publicidad
Idiomas disponibles
Idiomas disponibles
SUPORTE SUPER WALL
2
1
3
4
7
8
1
- Slightly lean back the superior part of your TV.
1
- Attach the superior rim (7) of plasma support to the superior edge (8) of the base plate.
2
- Replace your TV on the vertical position and completely tighten both fastening screws (6).
3
Adjusting the angle of the TV
To alter the inclination angle of your TV, release both wing locking nuts (5), adjust to the desired
inclination according to the pictures below and then tighten the wing locking nuts again.
5
4
4
- Release the wings (5).
- To lean forward lift the screen to the direction 9 leading the superior part to the direction 10,
5
inducing the rotation movement 11.
- To lean backwards, execute the opposite movement.
6
- Start attaching the base plate putting all screws without
2
completely tightening them.
- Level the base plate using the spaces of the oblong holes (2, 3 e
4). After leveling them, start the final tightening in all screws,
beginning from the screw attached on hole #1.
3
Placing the TV on the base plate
7
8
2
5
3
10
11
9
6
6
Publicidad
