Cleaning And Maintenance - Duronic CG250 Manual De Instrucciones

Cleaning and Maintenance

1. The inside of the machine can be cleaned with a soft brush or cloth and the
shell can be wiped with a damp cloth/friendly cleaning agent. Never submerge
the appliance under water.
2. Do not add any additional lubricant to the blade as this may have an
adverse effect on the component that is already lubricated.
Product must be used on a flat
and stable surface
To avoid the risk of electric shock,
this product must be kept away
from water.
Keep the product away from
any stoves as the fumes or
steam may cause the appliance
to break down.
In order to prevent injury or harm,
please keep the product out of
reach of children.
10
Troubleshooting
1. If your grinder does not work, please check the following:
a. The power is on
b. The plug has been correctly inserted into the socket/outlet
c. The socket/outlet is switched on
d. There are no ingredients stuck inside the cup or appliance itself
e. The cup component is correctly locked into the body
2. If your grinder suddenly stops working, please check the following:
a. There is a power failure
b. The motor has overheated. Allow the motor to cool for 30 minutes before
operating.
*If the above troubleshooting solutions are unsuccessful, please contact
Duronic for further assistance.
Kind reminder:
1. Maximum grinding capacity is 75g. Please do not exceed this capacity as it
may cause damage to the blade/motor.
2. If the grinder is being used for ingredients consisting of strong aroma,
please clean the appliance thoroughly after use in order to prevent any odor
forming.
3. Operating time: For every one minute of grinding, the appliance must be
allowed to cool down for one minute in order to avoid overheating/damage to
the motor.
11