KLV-30MR1
14
(GB)
1Remove the two screws from the Tabletop
Stand.
Note
Do not lay the display down when carrying
out the procedure.
2Holding down the base of the Stand, lift
up the display slightly, then move it away
from the Stand. The display will separate
from the Stand. At least two persons must
hold and carry the display.
Notes
• At least two persons must work together
on this procedure.
• When lifting up the display, hold the base
of the Stand so that it is not lifted along
with the display.
3Remove the four hooks on the rear cover
of the display.
Note
Lay the display face down on a soft cloth.
Lift up and carry
forward.
2
Base of the Stand
3
1
Soft cloth