Unfolding Steps; Operation; Introduction Of Handlebar Parts - e-TWOW S2 ECO Instrucciones De Uso

Unfolding steps

1. Press the rear brake fender in the direction of the arrow, as shown in figure (a), until the
folding hook is released from the opening located on the rear brake. Then, lift the handlebar until
it reaches the normal position and the locking bolt comes into place, like in figure (b).
2. Raise the two handles of the handlebar until they automatically return to the normal position,
figure (c).
3. Push the lock lever in the direction of the arrow in figure (d) and lift the handlebars to the
desired height. Now press the button shown in figure (e) and secure it in one of the two holes, as
desired. Then close the lock lever and make sure that you always keep the lever secured and
tightly closed.
1. Introduction in handlebar parts
7
1. Thumb accelerator
2. Switch button
3. Settings button
4. On/Off light button
All manuals and user guides at all-guides.com
a b
d

OPERATION

5. Horn button
6. Handlebar
7. Thumb electronic magnetic brake
7
c
e