CAUTION!
Do not use a dosing device/ball when carrying out a washing and drying programme.
1.
Load the laundry.
2.
Add detergent and fabric softener.
3.
Switch the machine on: turn the selector dial to the required washing programme/fab-
ric.
4.
Press the relevant buttons to set the required options.
If possible, do not set a spin speed lower than that proposed by the appliance to avoid too
long a drying time therefore saving energy. In any case the lowest values you can select are
900 r.p.m. for cottons and synthetics and 700 r.p.m. for delicate fabrics. The reduction of
the spin speed is only possible after selecting drying.
5.
Press the button 6 to set the drying time. When selecting a «non-stop programme» the
pilot lights 10.1 and 10.2 illuminate.
The DRYING TIME value appears on the display for some seconds, then the entire dura-
tion of the washing and drying cycle appears.
6.
Press the button 8 to start the programme. After the programme has started, the time
remaining is updated every minute.
7.
At the end of the programme, follow the indications given in the previous chapter.
Then, turn the selector to the O position to switch the machine off.
8.
Remove the laundry.
WASHING PROGRAMMES
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
COTTON
95° - 30°
Main wash - Rinses - Long spin
Spin at the maximum speed
Max. load 6 kg - Reduced load 3 kg
For white and coloured cotton (normally soiled
items).
COTTON + PREWASH
95° - 40°
Prewash - Main wash - Rinses - Long spin
Spin at the maximum speed
Max. load 6 kg - Reduced load 3 kg
For white and coloured cotton (normally soiled
items).
All manuals and user guides at all-guides.com
3)
Washing programmes
Options
Compartment
SPIN REDUCTION
RINSE HOLD
1)
STAIN
2)
TIME SAVING
EXTRA RINSE
SPIN REDUCTION
RINSE HOLD
STAIN
2)
TIME SAVING
EXTRA RINSE
17
Detergent