Building-In - AEG LAVAMAT 11842 VIT Manual De Instrucciones

40

Building-in

WARNING!
Should the appliance power supply cable need to be replaced, this must be carried out
by a Service Centre.
BUILDING-IN
This appliance has been designed to be built into
the kitchen furniture. The recess should have the
dimensions shown in picture A.
Preparation and assembly of the door
The machine is originally pre-arranged for the as-
sembly of a door opening from right to left.
In this case it is sufficient to screw in the hinges
(1) and the counter-magnet (6) provided with the
appliance, at the right level (Fig. B).
• Door
The dimensions of the door should be:
– width 595-598 mm
– thickness 16-22 mm
The height (C-Fig. C) depends on the height of
the adjacent furniture's base.
• Hinges
To mount the hinges it is necessary to drill two
holes (dia. 35 mm, depth 12.5-14 mm depend-
ing on the depth of door furniture) on the in-
ner side of the door. The distance between the
holes hobs fixing centres must be 416 mm.
The distance (B) from upper edge of the door to
the centre of the hole depends on the adjacent furniture's dimensions.
All manuals and user guides at all-guides.com
600
min.
596 555
560
min.
820
75
60
170
100
6
1
7
3
8
2
16-22
35 o
14
595-598
176,5
416
818
4
5
B
416 C
22+1,5