cable matters 201079 Manual Del Usuario página 5

3. SATA DRIVE INSTALLATION
3.1 SATA SSD or HDD Drive Installation
Important Note! Handle the drive carefully to avoid damage. Always use an anti-static
wrist strap or other grounding method. Place the enclosure tray on a clean, solid surface.
1) Press down on the PULL tab on the bottom of the case to slide off the cover.
2) Carefully insert the SATA drive. The connector is keyed to fit in one direction only.
3) Align the cover with the case and insert it until it clicks closed.
Note: Attach the adhesive foam pad in the middle of the lower cover to secure a thin 7mm drive
USB-C® Gen 2 External 2.5" SATA SSD Enclosure
www.cablematters.com
3