How To Use The Buttons - Daitsu APD12-AN Manual De Usuario

How to use the buttons

Auto operation
Ensure the unit is plugged in and power is available. The
OPERATION indicator on the display panel of the indoor unit
illuminates.
1. Press the MODE button to select Auto.
2. Press the TEMP button to set the desired temperature.
The temperature can be set within a range of 17ºC (62ºF)
~ 30ºC in 1ºC (2ºF) increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically choose
the mode of Cooling, Fan Heating and Dehumidifying
by sensing the difference between the actual ambient
room temperature and the set temperature on the remote
controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the desired
mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL, HEAT, (cooling &
heating models only) or FAN mode.
2. Press the TEMP button to set the desired temperature.
The temperature can be set within a range of 17ºC (62ºF)
~ 3ºC in 1ºC (2ºF) increments.
3. Press the FAN SPEED button to select the fan speed in
four steps- Auto, Low, Med, or High.
4. Press the ON/OFF button to start the air conditioner.
NOTE
In the FAN mode, the setting temperature is not displayed in
the remote controller and you are not able to control the room
temperature either. In this case, only step 1, 3 and 4 may be
performed.
34