Transport - KNF LAB LABOPORT SH820G Manual Del Usuario

Transport

26
6 Transport
General
CAUTION
à
Transport the vacuum system in its original packaging to
the installation site.
à
Keep the original packaging of the vacuum system (e.g.
for later storage).
à
Check the vacuum system for transport damage upon re-
ceipt.
à
Document any transport damage in writing.
à
If necessary, remove the transport locks before commis-
sioning the vacuum system.
à
Do not mount the two collection flasks (see Chapter Con-
necting the pump [} 34]) on the vacuum system until you
have brought the vacuum system to the installation site.
Parameter
Parameter
Storage temperature [°C]
Transport temperature [°C]
Permissible humidity (non-
condensing) [%]
Tab.12: Transport parameters
Translation of Originial Operating Instruction, KNF 325562-325564 06/21
Vacuum system SH820G / SR820G SH840G / SR840G
Risk of injury from sharp edges on the
packaging
There is a risk of injury from cutting on
the sharp edges when grabbing cor-
ners or when opening the packaging.
à
Where appropriate, wear suitable
personal protective equipment
(e.g., safety shoes, safety
gloves).
Value
+ 5 to + 40
- 10 to + 60
30 to 85