Base Assembly - Proline VP40 Manual De Instrucciones

DESCRIPTION
Front guard
Tighten
Retaining nut

BASE ASSEMBLY

1. A ach the outer pole to the base by fastening the
four screws.
2. Unscrew and remove the height adjustment ring.
3. Slide the base ornament through the outer pole
un l it sits directly on the base.
4. Slide the internal pole up from the outer pole to
the desired height then securely hold this posi on
by turning the height adjustment ring clockwise.
5. Unscrew the screw of the control box.
Locking nut
Fan blade
Rear guard
Loosen
Base
Motor spindle
Oscilla
Speed bu ons
Internal pole
Outer pole
2
GB
knob
Screw
Tighten
Height adjustment ring