Battery Installation; Fcc Statement - Rain Bird TBOS-BT Manual Del Usuario

Ocultar thumbs Ver también para TBOS-BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
ENGLISH
A. SPECIFICATIONS
• Programmable with a smartphone
or tablet through Rain Bird Apps
• Communication with the Rain Bird App
with Bluetooth 4.0 technology.
• Operates with the RAIN BIRD TBOS
latching solenoid.
• 3 independent programs (A, B, C) with up
to 8 start times per day and per program.
Stations can be assigned to several
programs with different watering run time.
• Watering time from 1 minute to 12 hours
per station.
• Watering cycle: customized cycle (7 days),
even, odd, odd-31 (no watering on 31),
cyclical.
• Manual watering capabilities.
• Program level and global Monthly
Seasonal Adjust (0 to 300%).
• Rain Delay (1 to 14 days).
• Watering programs backup.
• Station names capabilities.
• Master Valve connection (not available on
1-station module).
• Sensor connection (Rain sensor or Soil
Moisture sensor).
• Operating temperature range: 14°F
to 149°F.
• Rated IP68: 100% waterproof and fully
submersible.
• Designed for use in closed valve box where
there is no exposure to UV radiation.
B. 9V BATTERY INSTALLATION
(not included)
See diagram 1.1
• Powered by a new 9V alkaline battery
type 6AM6 (international standard) or
6LR61 '(European standard)
• Low battery icon displays on the Rain
Bird App.
C. SOLENOID INSTALLATION
See diagrams 1.3
Mounting the solenoid on the valve: remove
the existing solenoid on the valve and
replace it with the latching solenoid.
Gently screw it hand-tight.
Connect the latching solenoid to the
controller with waterproof wire connectors.
Maximum Wire run between the module
and solenoid:
18 AWG (0.75 mm2) 32 ft (10 m)
16 AWG (1.5 mm2) 100 ft (30 m)
Check the system by using the manual
start function. If the system does not
turn on, screw the solenoid a little tighter
to the valve.
D. MAINTENANCE
• Replace the 9V battery (alkaline : type
6LR61 or equivalent) once a year.
• If you connect a transmitter to the control
module in infrared mode, make sure that
the optical connector is clean when the
connection is made. Use water to clean
it if needed.

FCC STATEMENT

Caution: changes or modifications not
expressly approved by Rain Bird could
void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the

Publicidad

Tabla de contenido
loading

Tabla de contenido