Roca SENTRONIC A525165203 Guia De Inicio Rapido página 4

5a. Battery installation (only A525165203)
Assemble the battery, have battery case to be covered and put it back to the slot of valve box. (only A525165203).
Attention
• Please be aware of the positive and negative electrode direction of battery. The raised part of battery case should be
aligned with the slot of battery case.
• Without sealing the battery case firmly, this will affect the use, water-proof capability and life of product.
• The internal part of battery case required to be remained dry. Water penetration of battery case may influence the
battery life and product safety.
• New and old batteries should not be mixed for usage.
5b. Main power installation (only A525165303)
Use the cable connection box to connect the switching power and the power supply (100-240V~) terminals. Please,
install the switching power and the connection box inside the valve box as described on below image.
Switch power
Close
Attention
• For safety concern, the power could only be supplied to power switch after product installation is completed.
• Main power supply should be installed with appropriate thermal fuse(10-15Amp) or other protection switch.
• In case that you connect the power cord by other methods, please ensure reliability and insulation of connecting wire.
Battery box cover
4pcs AA batteries
Bulge
Battery box
Snap-in box
Input : AC100-240V~
3