Tripp-Lite B013-330 Guia De Inicio Rapido

Introduction
The B013-330 CAT5 KVM Extender Set utilizes CAT5 cabling to extend your computer's keyboard, monitor and mouse control up to 100 m (330 ft.) away.
The CAT5 KVM Extender Set comprises two units–The Transmitter (Local Unit) and the Receiver (Remote Unit). The Transmitter Unit contains local console ports,
allowing the user to have both a local and a remote console.
The B013-330 Receiver contains Gain and Equalization knobs that allow the user to manually adjust the video parameters of the remote console. Users can
easily optimize the video screen output via these mechanical knobs.
Package Contents
• Transmitter Unit (PC/KVM Module with Local Console Ports)
• Slim 3-in-1 PS/2 KVM Cable – 3 ft.
• Quick Start Guide
Front & Rear View
Receiver Unit – Remote Console Module
1 3 4 5 6
2
Receiver Unit (Front Panel)
1
Red Power LED
2
Green Link LED
3
PS/2 Keyboard Port
4
PS/2 Mouse Port
5
Gain Adjustment Knob
6
Equalization Adjustment Knob
Preparation Before Installation
Before you install the B013-330 CAT5 KVM Extender Set, you should have these items on the checklist ready:
1. PC/KVM with either PS/2 or USB keyboard, mouse and monitor ports.
2. Check that the display mode of the computer is no larger than 1600 x 1200 pixel dimensions and set the refresh rate to be one that is more commonly used,
such as 60Hz.
3. The B013-330 CAT5 KVM extender supports only standard 5-key mouse and keyboard; more advanced mouse/keyboard functions will not be supported by
CAT5 extension.
4. Tripp Lite N001, N002 or N105 Series cables. Note that shielded cable (N105 Series) could give better video for longer extensions.
5. Choose a routing for the CAT5 cable that is as short as possible and avoids machinery, light ballasts and anything else that could generate electrostatic
interference.
6. Prepare the PS/2 keyboard, PS/2 mouse and monitor that will be connected to the Receiver Unit and/or the Transmitter Unit.
7. There should be an available power outlet near the remote console unit.
8. Turn off all computers before connecting the B013-330 CAT5 KVM Extender Set.
All manuals and user guides at all-guides.com
Quick Start Guide
CAT5 KVM Extender
Transmitter – PC/KVM Module with
Local Console Ports
7 8
Receiver Unit (Back Panel)
7
Power Adapter Receptacle
(DC9V, 1A)
8
CAT5 Extension Port, RJ45
(Female)
9
Monitor Port (HDB15)
Model: B013-330
Receiver – Remote Console KVM
• Receiver Unit (Remote Console)
• Power Adapter (DC9V 1A) for Receiver Unit
• USB Cable – 4 ft.
Transmitter Unit – PC/KVM Module with Local Console Ports
9 1 3 4
2
Transmitter Unit (Front Panel)
1
Red Power LED
2
Green Link LED
3
PS/2 Keyboard Port
4
PS/2 Mouse Port
5 6 7 8
Transmitter Unit (Back Panel)
5
CAT5 Extension Port, RJ45 (Female)
6
Local PC/KVM Port (integrated with
PS/2 keyboard, mouse and video
interface)
7
Local PC/KVM USB port (Type B)
8
Monitor port (HDB15)