• Correct installation of the hygiene cover ensures accurate readings.
• Using the thermometer without a hygiene cover may cause inaccurate readings.
• Do not submerge the device in any liquids or expose it to direct moisture.
• This thermometer is not intended as a substitute for a doctor's consultation.
• If the condition does not improve consult your doctor.
• This is not an AP or APG product.
• Intended use: The infrared ear thermometer can measure the infrared heat
generated by eardrum area and surrounding tissues to reflect patient's body
temperature accurately.
• Choking from swallowing hygiene covers and connection ring by children or pets
is possible, please keep out of reach of children and pets.
TEMPERATURE ALARM
• If the thermometer detects a body temperature 99.5°F (37.5°C), one long beep will
sound followed by three short beeps to warn the user of potential fever.
SWITCHING BETWEEN FAHRENHEIT (°F) AND CELSIUS (°C)
• In 'Power off' mode, press and hold the 'Scan' button.
• Then press the 'On/Mem' button for 3 seconds whilst still holding the scan button. The
'°C' will change to '°F'. You can use the same process to change from '°F' back to '°C'.
MEMORY FUNCTION
• Press the 'On/Mem' button again to see the last temperature stored. The thermometer
will automatically save the last reading into the memory, if it is within the temperature
range of 93.2°F to 108.0°F (34°C to 42.2°C).
Before first use, pull to remove the tab from the battery cover.
Correct installation of the hygiene cover ensures accurate readings. Always use a
new and undamaged hygiene cover before each reading.
1.
Gently twist the probe cap
to remove.
WARNINGS AND PRECAUTIONS
FUNCTIONS
INSTALLING THE HYGIENE COVER
2.
Place a new hygiene cover
into the connection ring.
3.
Insert the thermometer probe
into the centre of the hygiene
cover and connection ring.