Electromagnetic Fields (Emf); Before First Use; Using The Appliance; Toasting Bread - Philips HD2589 Manual Del Usuario

- Avoid touching the metal parts of the toaster, as they become very hot during toasting. Only
touch the controls.
- Do not place the toaster on a hot surface.
- Only connect the appliance to an earthed wall socket.
- Always unplug the appliance after use.
- The toaster is intended for household use only and may only be used indoors. It is not intended
for commercial or industrial use.
- If a slice of bread or the filled baskets (specific types only) get stuck inside the toaster, unplug
the appliance and let it cool down before you try to remove the bread. Do not use a knife or a
sharp tool, as these may cause damage to the heating elements.
- The warming rack is only intended for warming up rolls or croissants. Do not put any other
ingredients on the warming rack, as this may lead to a hazardous situation.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

Before first use

Remove any stickers and wipe the body of the toaster with a damp cloth.
Before you use the appliance for the first time, we advise you to let the appliance complete a few
toasting cycles without slices of bread on the highest browning setting in a properly ventilated room.
This burns off any dust that may have accumulated on the heating elements and prevents unpleasant
smells when toasting bread.

using the appliance

1 Put the appliance on a stable and flat surface, away from curtains and other combustible
materials. Put the plug in the wall socket.
2 To adjust the length of the cord, wind part of it round the brackets in the base of the
appliance (Fig. 2).

toasting bread

1 Put one or two slices of bread in the toaster (Fig. 3).
2 Select the desired browning setting. (Fig. 4)
- Select a low setting (1-2) for lightly toasted bread and a high setting (5-7) for darkly toasted
bread.
- Select the defrost function Ñ (settings 6 to 7, depending on the desired browning degree) for
toasting frozen bread.
3 Push the toasting lever down to switch on the appliance. (Fig. 5)
The toasting lever will only stay down if the appliance has been connected to the mains.
Note: You can stop the toasting process and pop up the bread at any time by pressing the stop button on
the toaster (Fig. 6).
4 To adjust the browning setting during toasting, turn the browning control.
5 When the toast is ready, it pops up and the toaster switches off.
6 Remove the toasted bread. To remove smaller items, you can move the toasting lever
upwards a little further.
Tip: If bread gets stuck inside the toaster, remove the plug from the wall socket and let the appliance cool
down completely. Then carefully remove the bread from the toaster.
EnglisH
7