Connecting The Headphones To A Second Bluetooth; Device; Clearing Paired Devices; Connecting The Headphones Via Audio Cable - Silvercrest SBKP 1 A1 Instrucciones De Utilización Y De Seguridad

Connecting the headphones to a second
Bluetooth
The headphones may be connected to two Bluetooth
at the same time. If the headphones are already connected to a device, follow
the steps below to connect the second device:
Activate multipoint mode by pressing and holding
Acoustic signal sounds. The first communication device (cell phone or com-
puter) is disconnected.
Now connect the headphones to the second communication device via
Bluetooth . Please refer to the notes in the instructions for your communication
®
device. Select the entry "SBKP 1 A1" from the list of devices detected by
your computer or mobile device. The second communication device is con-
nected.
Briefly press
nication device is reconnected. Now, both communication devices are
connected to the headphones simultaneously.

Clearing paired devices

In paired mode (the LEDs will briefly flash blue twice every 3 seconds),
press and hold
The headphones are now in pairing mode. The LEDs
Simultaneously press and hold
and two beeps sound.
The memory in the headphones is cleared and it will not auto-connect to
the previously paired communication device.

Connecting the headphones via audio cable

Insert the 0.14 inch (3.5 mm) plug at one end of audio cable
0.14 inch (3.5 mm) socket
14 US-EN

device

®
button and an acoustic signal sounds. The first commu-
6
button for 3 seconds and an acoustic signal sounds.
6
.
10
communication devices
®
button
button and button
6
for 3 seconds.
6
flash red and blue.
2
for 2 seconds
4
to
14