Use Brake
To lock wheels, step the brake lever downwards.
30
To release wheels, just lift the brake lever upwards.
Tip
Always apply brake when stroller is in stopped position.
Adjust Handle
The handle has 3 positions.
To adjust the height of the handle, pull the handle upward or downward
- 1
adjustment button.
32
Fold Stroller
!
Please fold the hood before folding the stroller.
Press the recline handle on the back of backrest to rotate the backrest to horizontal position.
Lift the folding button , step the folding pedal downwards , push the stroller forward to fold
The storage latch will automatically hook onto the storage mount, then the stroller is folded and locked
34
completely.
Use Accessories
Accessories may be sold separately or may not be available depending on region.
Use with Joie Child Restraint
When using with Joie child restraint gemm, iGemm, iLevel, i-Snug please refer to the following instructions.
1. To attach adapter, place adapter onto mounts as show
completely.
36
2. To attach child restraint, place child restraint onto adapter as show
restraint is locked completely.
38
3. To remove child restraint, lift the child restraint upwards
- 1
buttons A.
39
!
If you have any problems about using the stroller and the adapter, please refer to their own instruction manuals.
!
To remove adapter, lift the adapter upwards
40
!
Remove the adapter show as
41
!
Please don't fold stroller when attaching the child restraint.
Use Carry Cot
Carry Cot Assembly
1. Open the wire support on both side of the carry cot
"Click" sound means the wire support is secure.
Place the mattress into the carry cot,
43
and smooth it down.
!
Always use the mattress when using the carry cot.
!
Mattress cover can easily be removed to wash.
2. Adjust carry cot hood
Open the hood and pull the front end to secure.
Close the hood by pressing the folding buttons on either side.
17
31
- 2
32
while pressing the handle
33
33
.
35
, A "click" sound means the adapter is locked
37
, A "click" sound means the child
39
- 2
while pressing the two stroller fix release
- 2
- 1
while pressing the two release buttons.
40
42
, Then click the wire into the four plastic parts, A
- 1
42
- 1
43
44
- 1
44
3. Assembly carry cot apron
Place the apron over the carry cot, then attach the 5 pairs of hook and loop fasteners.
Carry cot assembled completely as
45
Attach Carry Cot onto Chassis
Align the sides of the carry cot with the adapters on the frame.
Place the carry cot directly down until it clicks into place.
A click sound means carry cot assembled completely.
!
Always remove the adapters before using the carry cot.
!
Please don't fold stroller when attaching the carry cot.
Remove Carry Cot
Press release buttons on both side of carry cot
Use Footmuff Apron
The soft footmuff apron can provide your child with a warm and comfortable sleeping environment.
Assemble the footmuff apron by following these steps.
1. Adjust the calf support and backrest to level position and recline position respectively before assembling
footmuff apron.
49
2. Cover the calf support with footmuff apron.
50
The assembled footmuff apron is shown as
51
Use Rain Cover
To assemble the rain cover, place it over the stroller.
!
Before using the rain cover, to be make sure the seat has been fastened.
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
!
To be used under adult supervision. Do not use on a pushchair without a canopy.
Use Seat Liner
see images
53
Use Shoulder Harness Pad Cover and Crotch Harness Pad Cover
The shoulder harness pad cover or crotch harness pad cover can be removed from the webbing. Simply
reverse these steps to re-assemble shoulder harness and crotch harness pad cover.
45
- 1
46
47
48
- 1
, and then lift it upwards.
48
- 2
52
18