Tabla de contenido
Publicidad
Telephone Helpline: 0845 146 2887 (United Kingdom)
Adjusting the Slush Consistency
The thickness of the slush consistency may be adjusted (+/-) using the
screw located at the rear of the dispenser (see below). + for thicker
consistency, - for thinner consistency (see Fig 2)
Using the Dispenser for Chilled Drink
1.
Turn on the main switch on the side of the dispenser (see Fig 1)
2.
Switch the stirring motor to the On position (see Fig 1)
3.
Switch controller to Daytime working mode by pressing
4.
Ensure the mode selector switch is set to the Chilled Drink setting
Dispensing Product
To dispense product pull the tap lever.
Note: During inactivity in Slush mode product may become frozen in tap. To clear tap open and close
tap lever repeatedly until blockage clears and product can be dispensed. In extreme situations it may
be necessary to allow product to warm in Chilled drinks mode until blockage is cleared
Day / Night Mode
The dispenser is fitted with a Night Mode for energy saving during non-serving periods.
1.
Press
button on timer. The dispenser will enter energy saving mode. The product in the bowl will be
held between 1C and 4C as chilled beverage.
2.
Press
button to return dispenser to Day Mode.
Display Lighting
All manuals and user guides at all-guides.com
on the temperature controller (see Fig 1)
(see Fig 1)
UK
Publicidad
Tabla de contenido
