Baby Jogger City Go ISOFIX Manual Del Usuario página 12

EN
INSTALLING THE BASE
All manuals and user guides at all-guides.com
1 Install ISOFIX guides on vehicle lower anchor
bars.
2 Pull out the support leg from the attachment.
3 Pinch the Adjustment buttons on each side
of the car seat and slide out the ISOFIX
attachment legs. The length is adjustable in 8
different positions.
4 Attach the ISOFIX connector arms to the
lower anchor bars.
5 Push the adjustment buttons towards the
ISOFIX anchors until both connectors are
locked and the indicators are green on both
sides.
6 Push the base back towards the seat back,
making sure the base is installed firmly
against the seat back.
7 Push the support leg adjuster and adjust the
support leg so that it makes full and firm contact
with the vehicle floor. The two pressure monitors
at the base of the support leg must turn from red
to green to ensure proper installation. C heck that
the front support leg clicks into position and is
correctly adjusted.
10