Baby Jogger City Go ISOFIX Manual Del Usuario página 13

Note:
All manuals and user guides at all-guides.com
• Check that the front support leg clicks into
position and is correctly adjusted.
• Do not place the front support leg on a floor
storage compartment lid. The front support leg
MUST make full contact with the vehicle floor.
• Make sure the support leg does not raise the
base from the surface of the vehicle seat.
ATTACHING THE CAR SEAT TO THE BASE
8 Lower the carseat on to the base and make
sure that all 4 connection bars engage
firmly and click into position on the base
connection points. Make sure the infant
carrier handle is in the upright position and
that it clicks into place.
9 Lift the car seat to make sure that all four
connections have engaged and the three
connection indicators have changed from red to
green.
DETACHING THE CAR SEAT FROM THE BASE
10 While sliding the secondary lock to the left,
pull the seat release button to release the
car seat from the base.
11 Lift up to remove car seat.
11
EN