X-lander X-cite Guia De Inicio Rapido página 13

All manuals and user guides at all-guides.com
1. UNFOLDING THE FRAME
Unclip the linking interlock (1.1). Unfold the pram by lifting its handle up until
the locks (1.2) are engaged.
WARNING: Prior to assembling the baby carriage make sure that folding gears
have been locked.
2. FOLDING THE FRAME
Detach the pram, stroller seat or safety seat from the frame. Release the lock
preventing the frame from folding accidentally and pull the grips on the handle
upwards (2.1). Fold the frame holding the handle as shown in the picture (2.2).
3. ASSEMBLY AND DISASSEMBLY OF REAR WHEELS
To assembly or disassembly the wheel, push rubber button, which is in the
middle of the wheel.
4. MOUNTING OF THE FRONT WHEEL
In order to mount the wheel, slide it onto the axle until the lock is engaged.
5. DISMOUNTING OF FRONT WHEEL
In order to take the wheel off, push the button shown on the figure , and pu l l
the wheel off the axis.
6. WHEEL BLOCKADE
The stroller is provided with swivelling front wheels. A special button blocks
the wheel swivelling movement. After the button has been pressed, the wheels
are blocked straight. To release the blockade, press the lever.
7. PUSH BAR
Press both buttons on the handle of the push bar to adjust the height.
8. BRAKE
To apply the brake: push the pedal down with your foot. To release the brake
pick its bar up.
9. ADJUSTING OF HARNESS
Change of straps length in the harness by sliding the regulator to the one side
or the other, adapting it to the child's body.
10. SHOPPING BASKET INSTALLATION
Fasten the snap fasteners and attach the basket to the chassis as shown in
the pictures.
11. INSTALLING STROLLER COT ON THE CAR FRAME
Slide the catches of the stroller cot into mounting seats in the frame, until locks
are engaged.
12. DISMOUNTING STROLLER COT FROM THE CAR FRAME
Push the buttons unlocking catches of stroller cot in (a), then pull it out from
mounting seats (b).
13. ASSEMBLY AND DISMANTLING OF THE CANOPY
To assemble the canopy, insert its clamps into the assembly openings (a).
To remove the canopy, press in the interlocks of clamps and bring out the
canopy from assembly openings (b).
14. FOOTREST ADJUSTMENT
Press the buttons on both sides of footrest and adjust it to the required position.
15. INSTALLING OF GUARD-RAIL
Push in the ends of the guard-rail into mounting holes, until locks are s napped.
16. TAKING THE GUARD-RAIL OFF
Push in the buttons of the guard-rail locks and slide its end out of the moun-
ting holes. The guard-rail may be tilted, when undone only from single side.
17. ATTACHING THE COVER
To attach the cover, put the straps with snap fasteners through the plastic
semi-circle and fasten the snap.
13