BABYZEN YOYO+ Guia Del Usuario página 10

Ocultar thumbs Ver también para babyzen YOYO+:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

en
Installation of backrest
1.
Using a screwdriver or a pen, retract
the red pin.
2.
Insert backrest from the back.
3.
On the left hand side of backrest
(the side that does not have red pin),
mount hinge into the stroller frame.
4.
On the right hand side of backrest,
align hinge.
5.
Push red pin in to lock the backrest
into position.
Installation of seat base
1.
Mount seat base fabrics over
backrest.
2.
Slot plastic clips onto both sides of
stroller frame.
3.
Secure the straps around the lateral
tubes.
4.
Under the seat base fabrics, secure
the two straps by inserting into the
corresponding slots in seat base.
5.
On the front centre of seat base
fabrics, secure strap by looping
through slot in seat base.
6.
On the sides of seat base fabrics,
secure the straps around horiztonal
bar by looping through buckle on the
back.
Installation of canopy
1.
Insert large metal wire inside the front
rim of the canopy.
2.
Insert small metal wire inside rear rim
of the canopy.
10
All manuals and user guides at all-guides.com
3.
4.
5.
6.
Installation of basket and shoulder strap
1.
2. & 3.
4. & 5.
Installation of seat pad and harness
1.
2.
3.
4.
5.
Insert ends of the small wire into
the inner mounts of handlebar, and
secure with cord loops.
Position the cord loops of large wire as
indicated.
Insert ends of the large wire into the
external mounts of the handlebar,
and secure with cord loops.
Affix the rear section of canopy to the
back of backrest.
Hook shoulder strap to the rings
underneath seat.
Secure the four straps on front
of basket by looping through slots
located on footrest.
On the rear rim of basket, secure
the straps by looping through the slots
located on rear legs.
Thread the harness shoulder straps
through one of the three pairs of slots
on the pad, according to the height
of your child.
Thread the harness waist straps
through the slots on the pad.
Thread the harness crotch strap
through the slot on the pad.
Affix the front loop of seat pad to the
hook under seat.
Connect the shoulder straps to the
waist straps.

Publicidad

Tabla de contenido
loading

Tabla de contenido