KidTrax Disney KT1024WM Manual Del Usuario página 10

Get to Know Your Scooter Before Driving
Dashboard
F
Power switch - Turn the power switch to the ON (I) position. The power switch must
A
be turned on in order to drive the Scooter and for the headlights and extra sounds to
function.
Forward/Reverse Switch - Toggle switch forward to drive forward or back to drive
B
in reverse.
Foot Pedal - The foot pedal controls forward/reverse motion.
C
To Stop - Release the foot pedal, and the Scooter will stop.
NOTE: When the foot pedal is released, the Scooter will coast slightly before
coming to a complete stop.
Music and Motor - To hear music and flash the left turning signal, press the left
D
side of the button. To hear the engine and flash the right turning signal, press the
right side of the button. These features stop after button is released.
E Ignition and Horn Button - To hear the ignition, press the left side of the button.
To "honk the horn," push the right side of the button; headlight will flash.These
features stop after button is released.
F
Steering - Turn the Scooter to the left or right by rotating handlebars. Use both
hands.
Battery lndicator Button - To determine if the battery needs recharging, press
G
and hold the Battery Indicator Button. One, two or three Iights will illuminate,
indicating the level of power in the battery:
green, yellow, red = fully charged
yellow, red = partially charged
red = needs to be recharged
10
All manuals and user guides at all-guides.com
D
A
G
E
B
C
F