Removing The Battery; Replacing The Battery - KidTrax Disney KT1024WM Manual Del Usuario

Removing the Battery

It may be necessary to remove the battery for recharging, storage or replacement.
ONLY AN ADULT MAY REMOVE THE BATTERY.
1
Use a flat head screwdriver to unlock
the two screws at the back of the seat.
Lift seat.
2
Unplug the engine connector from
the battery.
3
Use a Phillips screwdriver to remove
the screw from the battery bracket.
Remove and set aside the bracket
and screw. Lift the battery from its
compartment.
ONLY AN ADULT MAY HANDLE
THE BATTERY. DO NOT drop the
battery. Permanent damage could
occur.

Replacing the Battery

ONLY AN ADULT MAY HANDLE THE BATTERY.
1
Lower the battery into its compartment. Replace the battery bracket on the
battery. Insert the screw into the battery bracket and
turn clockwise. Do not overtighten!
2
Plug the engine connector into the battery.
3
Position the seat over the battery.
4
Lower the seat hook into the hole (at front of seat).
Lock seat screw (Figure 1).
All manuals and user guides at all-guides.com
1
2
3
Battery
Bracket
1
Hook
13