Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustable Pivot Shoe
The shoe can be adjusted forward or backward to take advantage of the
unused portion of the blade or for special jobs requiring low blade
clearance.
Do not operate Sawzall without a shoe. Striking
the spindle against the work may damage the
reciprocating mechanism.
6509 Series (Fig. 4)
Fig. 4
Adjusting
s c r e w s
1.
To adjust the shoe, place hex wrench through access holes in
insulating boot and loosen four (4) screws.
2.
Move shoe to desired position
3.
Tighten screws.
4.
After adjusting the shoe, slowly pull the trigger to be sure the blade
always extends beyond the shoe and your work throughout the
stroke.
6519 Series (Fig. 5)
Fig. 5
1.
To adjust the shoe, pull out the shoe release lever 1/4 turn.
2.
Slide the shoe forward or backward to the desired position.
3.
To lock the shoe in position, push in the shoe release lever.
4.
After adjusting the shoe, slowly pull the trigger to be sure the blade
always extends beyond the shoe and your work throughout the
stroke.
page 6
All manuals and user guides at all-guides.com
WARNING!
Insulating
boot
Access holes
Hex wrench
Shoe release lever
WARNING!
To reduce the risk of injury, be sure the blade
always extends beyond the shoe and work
throughout the stroke. Blades may shatter if they
impact the work or shoe (Fig. 6).
Fig. 6
Stroke
Publicidad
Tabla de contenido
