brennenstuhl BDI-A 2 30 Instrucciones De Uso página 7

025905 BDI-A 30 DE 3210 (Schuko)_025905 BDI-A 2 30 11.10
Directions for use
1. Always plug the adapter directly into a wall socket.
2. Plug extension cables, cable reels, trailing sock-
ets, etc. into the safety adapter. Plug in the electri-
cal appliance (in switched-off condition).
3. Switch on the adapter by pressing the RESET
button. A red indicator must appear in the window
above the RESET button.
4. Now carry out a function test by pressing the
TEST button. A distinct switching noise must be
heard and the red indicator must disappear.
5. The adapter must not be used if the switching noi-
se is not heard and the red indicator continues to
appear in the window.
6. If the test proves successful, press the RESET
button again. The adapter is now ready for use.
Note:
From time to time, carry out a function test,
press the Test button and perform the procedure
described above.
After a power cut, switch on the adapter again.
The safety adapter is not suitable for appliances
which may give rise to consequential damage if
disconnected from the power supply for a
prolonged period of time (e.g. refrigerators, free-
zers, etc.).
This safety adapter does not eliminate the need
for other essential protective measures.
7