Sauder 412913 Manual Del Usuario página 7

4 4
BLACK 2 1/4" FLAT HEAD SCREW
(Used to fasten the CLEATS to the wall)
CLEAT ATTACHMENT TO THE WALL (CONTINUED)
5. Remove the CLEAT from the wall to finish drilling out the holes in the wall. Drill a 1/4" hole in the wall on the right for the wall
anchor and drill a 1/8" hole in the wall stud.
6. Turn the WALL ANCHOR (E) into the 1/4" hole in the wall until it is flush.
7. Fasten the CLEAT to the wall. Use a BLACK 2-1/4" FLAT HEAD SCREW (C) into the stud in the wall. Use a BLACK 2-1/4"
FLAT HEAD SCREW (C) into the WALL ANCHOR.
Repeat steps 1-7 on pages 6 and 7 to fasten the remaining CLEATS to the closet wall.
412913
All manuals and user guides at all-guides.com
SHELF
height
C
www.sauder.com/services
Wall Stud
E
Center of
CLEAT line
SHELF
height
Top edge of
CLEAT line
Page 7