Wi-Fi Coverage Availability
•
Before you permanently mount the floodlight unit, it is important that you confirm the availability
of Wi-Fi as well as the signal strength at the desired installation location.
•
Note that Wi-Fi quality can vary significantly at different locations around the home due to
environmental factors such as home construction type and wireless interference from other
electronic devices.
Checking your Wi-Fi network coverage
1
Connect your phone to the 2.4GHz Wi-Fi network band of your internet/broadband router.
Note: The camera can connect to a 2.4GHz network only.
2
Bring your phone to the location where you want to install the floodlight unit. If you have Wi-Fi
connection on your phone, the camera will also likely be able to obtain Wi-Fi connection. Check
the Wi-Fi signal strength status icon at the top of your phone screen. We recommend a minimum
of 1 bar showing as shown below. Further testing should be performed if the Wi-Fi signal strength
is only a single bar.
X
0
No connection
3
To avoid any potential Wi-Fi connection issues later, try playing a video through a media
EN
streaming service app, for example, YouTube
4
GETTING STARTED
!
1
2
Poor
Fair
Good
Wi-Fi signal strength icon
3
4
Excellent
or Netflix
, on your phone. If possible, temporarily
™
™