Kalorik USK MS 1 Manual Del Usuario página 6

All manuals and user guides at all-guides.com
USING THE CHOPPER
Put the axle unit into the bottom of the jug ensuring it is properly
•
positioned with the location features inside the jug.
Sit the chopper blade onto the axle
•
Add ingredients to the jug. Some hard foodstuffs (e.g. carrots,
•
cheese and meat) will need to be chopped before being put
into the jug. DO NOT OVERFILL THE JUG.
Hold the motor unit, and push the lid of the chopper onto the
•
bayonet fitting, turn the lid of the chopper and ensure that the lid
of the chopper and motor unit are tight.
Put the lid of the chopper on top of the jug, making sure that the
•
axle engages properly and that the chopper is located correctly
and securely into the jug.
Hold the jug handle securely with one hand, and the motor unit
•
with your other hand.
Press the on/off button.
•
NEVER remove the motor unit and lid of the chopper from the jug
•
until the blade has stopped spinning.
Only use the lid of the chopper, blade and axle unit in the jug
•
provided.
USING THE WHISK
removable stainless steel whisk)
Hold the motor unit, and push the whisk/frother body onto the
•
bayonet fitting, turn the whisk/frother body and ensure that it is
tight.
Push the end of the whisk firmly into the hole on the end of the
•
whisk/frother body.
Press the on/off button.
•
Do not touch the whisk while it is moving
•
Please refer to the information at the end of this instruction
•
booklet for recipe information and operating guidelines.
To remove the whisk for cleaning, grab the whisk and firmly tug
•
from the body.
While using the whisk, store the frother in the base in the storage
•
point provided.
(motor unit, chopper and jug)
(motor unit, whisk/frother body and
6
USK MS 1 - 080211