Cleaning And Maintenance - Waeco AirCon Service Center ASC5100G Instrucciones De Uso

Cleaning and maintenance

✓ The station shows the progress of the update:
After the update, the station sets the default settings:
The station then restarts and the standby menu appears.
5. Remove the USB stick.
✓ The station is ready for operation.
10 Cleaning and maintenance
!
WARNING! Risk of injury due to unplanned or unintended switch-
ing on of the air conditioning service unit
Switch off the AirConServiceCenter prior to all maintenance work and
disconnect the mains cable from the mains supply.
Pull the plug from the socket or from the AirConServiceCenter.
1. Clean the exterior of the device with a damp cloth as required. If nec-
essary, use a small amount of dishwashing detergent. Do not use
solvents or scouring agents.
2. Regularly inspect the service hoses (7) and (8). Do not start up the
AirConServiceCenter if it is damaged.
3. Every six months carry out a leak test with an electronic leak detec-
tion device.
102
All manuals and user guides at all-guides.com
Wait...
Erase flash... Erased!
Writing
Wait!
loading default
parameters
1 63488
7% 762751
ASC5100G
EN