BGS technic 9246 Manual De Instrucciones página 3

FEATURE
1. Used for parts straightening, bending and pressing.
2. Multi-position bed for work height adjustment.
3. With air pump can reduce labor and improve working efficiency
WARNING
•
This press is designed and intended for use by properly trained and experienced personnel only.
If you are not familiar with the proper and safe operation of a hydraulic press, do not use until
proper training and knowledge has been obtained.
•
Do not operate this press beyond it rated capacity.
•
DO NOT compress springs or other objects that could be ejected from the press. DO NOT
compress objects that could shatter.
•
Please understand the max. working stroke before operate, Do not overload the max. working
stroke, so as not to damage parts.
•
Check the press for loose or damaged parts before each operation. Replace damaged parts and
tighten all loose bolts before operating.
•
Some parts being pressed may have a tendency to pop out of the press or explode under
pressure. Protect yourself accordingly.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Workshop Press | 20 t
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9246
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed