Decathlon ORIGINAL 920E Manual Del Usuario página 19

64 Battery overload
65 / 66 / 67 Battery underload
80
Overheating controller
Communication error battery
81
control screen
83
Electrical system fault
Communication error controller
84
command screen
116
Controller fault
Cable accessories connector
Pedalling sensor connector
Motor cable connector
Turn off the bike and remove the battery. Replace
the battery and turn the bike back on. If the fault has
not disappeared, go to a Decathlon workshop for
repair.
Charge the battery. Once fully charged, put the
battery back on the bike and turn on the screen. If
the fault has not disappeared, go to a Decathlon
workshop for repair.
Turn off power assistance and turn off the control
screen.
Allow the electrical system to cool down. If the fault
has not disappeared, go to a Decathlon workshop for
repair.
Check the battery charge
Make sure that the battery is correctly inserted in its
housing.
Check that the control screen connection is fully
pressed in. If the fault has not disappeared, go to a
Decathlon workshop for repair.
Reset the electrical system: switch off the bike and
remove the battery. Replace the battery on the bike
and switch on the screen
Check that the control screen connection is fully
pressed in. If the fault has not disappeared, go to a
Decathlon workshop for repair.
Visit a Decathlon workshop for diagnostics and repair
Brakes connector
19
Control screen
connector