Operation; Raclette - Kompernaß SilverCrest SRGF 1400 A1 Instrucciones De Uso

Operation

WARNING! RISK OF INJURY!
► The appliance and the accessories become very hot during operation.
During operation, touch the appliance only on the temperature control 5
and the handles.

Raclette

ATTENTION! PROPERTY DAMAGE!
► Do not use metal utensils such as knives, forks, etc. when you remove food
from the griddle 3 or the pans 7 as they could damage the non-stick
coating. If the non-stick coating is damaged, stop using the appliance.
1) Lightly oil the griddle 3 and the pans 7 on the inside.
2) Turn the temperature control 5 to MAX. The operating light 4 lights up to
show that the appliance is heating up. Preheat the appliance for about 10
minutes.
NOTE
The operating light 4 remains switched on until the set temperature level is
►
reached. It may switch on and off again and again, depending on the ambient
temperature and the cooking situation. This is not a malfunction. It merely
indicates that the appliance is heating up again to maintain the tempera-
ture. When the appliance is set to MAX, the operating light 4 remains on
constantly.
► Depending on the room temperature, heating up will start at different posi-
tions on the temperature control 5.
3) Fill the pans 7 with the desired ingredients. Ensure that the pans 7 are not
overfilled otherwise the food could get too close to the heating elements and
could even touch them!
4) Place the pans 7 into the device. The slight recess 6 in the appliance helps
to keep the pans in place.
5) Turn the temperature control 5 towards 0 if you want to reduce the tempera-
ture. Turn the temperature control 5 towards MAX if you want to increase
the temperature again.
6) Remove the pans 7 from the device as soon as the contents are cooked.
WARNING! RISK OF INJURY!
Apart from the insulated handles, the pans 7 are very hot! Therefore, hold
►
the pans 7 only by the handle!
SRGF 1400 A1
GB │ IE │
7 ■